What to do if the heating circulation is not good
With the arrival of winter, the normal operation of the heating system has become the focus of many families. However, poor heating circulation is a common problem, resulting in uneven indoor temperatures and increased energy consumption. This article will analyze for you the causes and solutions of poor heating circulation, and provide hot topics and hot content on the Internet in the past 10 days to help you better deal with this problem.
1. Common causes of poor heating circulation
Poor heating circulation may be caused by a variety of factors. The following are common causes and corresponding solutions:
| Reason | Solution |
|---|---|
| There is air in the pipe | Exhaust air through the exhaust valve to ensure there is no air blockage in the pipeline |
| Water pump power is insufficient | Check whether the water pump is working properly and replace it with a more powerful one if necessary |
| clogged pipes | Clean pipes or replace clogged pipe sections |
| Improper installation of radiator | Re-adjust the position of the radiator to ensure the correct tilt angle |
| Insufficient system pressure | Supplement system pressure to normal range (usually 1-2bar) |
2. Hot topics and content on the entire network in the past 10 days
The following are recent hot discussions and hot content on heating issues across the Internet:
| topic | heat index | Main discussion content |
|---|---|---|
| Analysis of the reasons why the heater is not hot | 85 | Users generally report that the upper half of the radiator is hot and the lower half is cold. |
| Tips for using energy-saving heating | 78 | How to achieve energy saving by adjusting valves and temperature becomes the focus |
| Intelligent temperature control system recommendation | 72 | Young people pay more attention to smart heating systems that can be controlled through mobile APPs |
| Heating renovation in old residential areas | 65 | Governments in many places have launched plans to renovate heating pipes in old residential areas, triggering heated discussions |
| DIY heating maintenance methods | 60 | Simple and easy home heating maintenance tips gain widespread attention |
3. Detailed solutions to heating circulation problems
1.Exhaust treatment
Air in your heating system is a common cause of poor circulation. Each radiator is equipped with an exhaust valve. Find the radiator at the highest point and use a screwdriver to gently open the exhaust valve until water flows out. Then close it. Pay attention to preparing water containers to avoid getting the ground wet.
2.Check water pump
The circulating water pump is the "heart" of the heating system. First check whether the water pump is running, listen to whether there is any running sound, and feel whether there is vibration in the pump body. If the water pump doesn't work, check the power supply and controller; if it works but not powerful enough, you may need to replace it with a more powerful model.
3.Clean pipes
Heating systems that have been used for many years are prone to accumulation of scale and impurities. You can ask professionals to use special equipment for high-pressure flushing, or add system cleaning agent and circulate for several hours before draining and flushing. Severely clogged pipe sections may need to be replaced.
4.Adjust system pressure
Too low pressure can cause poor circulation. Check the pressure gauge, it should normally be between 1-2bar. When the pressure is insufficient, fill the system with water through the water replenishment valve to normal pressure. Pay attention to venting again after replenishing water.
5.Optimize pipeline layout
For newly installed systems, ensure that pipes have an appropriate slope (usually 2-3mm per meter) to avoid air pockets. The radiator should be installed at a certain inclination to facilitate exhaust.
4. Routine maintenance suggestions to prevent heating circulation problems
1. Conduct a comprehensive inspection of the system before the heating season each year, including pressure testing and venting operations.
2. Have the system professionally cleaned every 2-3 years to remove accumulated scale and impurities.
3. Install a water quality processor to reduce scale formation.
4. Consider installing an automatic exhaust valve to reduce the frequency of manual exhaust.
5. Keep the system full of water during non-heating seasons to prevent pipeline oxidation.
Most heating circulation problems can be effectively solved using the methods above. If the problem persists, it is recommended to contact a professional heating engineer for a detailed inspection. Remember, good heating circulation not only improves comfort, but also significantly reduces energy consumption and is environmentally friendly and energy-saving.
check the details
check the details
en
